The scaffolding Metal 6 produced by Piscopiello ponteggi srl is suitable for professionals who need to work at elevated heights but not with maximum safety and stability in the structure. It is made of galvanized steel with steps and horizontal tubes in 40x15x1.5 mm tubular steel. 40x1.5 columns with 48x3 mm clutches. and diagonals in galvanized steel 20x1.5. It has a base size of 2.00X1.10 m. and has a footprint that varies from 2.70 m to a maximum of 18.30 m.
The base consists of 4 wheels with a diameter of 200 mm. swivel with parking brake, the core of the wheel is made of steel and the outside is made of rubber to facilitate movement.
Unlike the Metal 5 model that may seem similar to the scaffolding m6 or other cheaper models, the scaffolding Metal 6 struttaralmente heavier in terms of weight the risers are from mt. 1.20 therefore always compared with the Metal 5 model or others that are simpler and easier to assemble because, being lower, they reduce weight and bulk. The horizontal ones are double instead of single like the Metal 5. In substance the scaffolding model Metal 6 is aimed at those who look for the strength and reliability of the past in the articles and that today is no longer found.
anti-crushing wheel for scaffolding
The Parapet and the base are previously galvanized and subsequently painted with polyester powders for a protection against rust that lasts over time
Elements compositions:
-
Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.
-
Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.
-
Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.
| DIMENSIONS AND OVERALL DIMENSIONS |
|---|
|
Overall height of structure
|
9,90 mt
|
|
Max. Height of work
|
10,70 mt
|
|
Max. Height on the floor
|
8,75 mt
|
|
Basic width
|
1,14 mt
|
|
Base length
|
2,00 mt
|
|
Weight
|
212 Kg
|
|
COMPOSITION (STRUCTURE ONLY) |
| Pc 1 |
Galvanized and painted base dim. overall dimensions 200x114 cm Complete with 4 anti-crushing norm wheels of 200 mm. gir. with brake. |
Pc 7
|
Galvanized 120 cm span (2 shoulders, 2 horizontal 4 diagonals) |
| Pc 1 |
Terminal Galvanized and painted railing of 100 cm (2 end shoulders, horizontal terminals, 4 diagonals) |
| Pc 4 |
Stabilizing auction 250 cm |
|
COMPLETE COMPOSITION IN ADDITION TO THE COMP. STANDARD |
Pc 3
|
Complete work surface 185x96 cm (1 fixed top and 1 shelf with trapdoor) |
| Pz 1 |
Full toeboard for worktop |
Pc 2
|
Internal aluminum ladder |
Pc 1
|
Adjustable aluminum internal staircase |
| Pc 1 |
Start shelf for ladder support |
| Pc 1 |
Floor protection kit |
| REFERENCE STANDARDS |
| UNI EN 1004 STANDARD |
| D.l.g.s 81 of 2008 Art 140 |
Important specifications of the UNI EN 1004 standard
The UNI EN 1004 standard allows a maximum scaffolding height of up to 12 Mt in indoor environments and up to 8 Mt. in outdoor environments with no wind. Once these measures have been passed, the Legislative Decree 81/2008 applies
Scaffolding heights M6 cod. M6990
Italiano
English
Français
