The METAL 6 scaffolding is suitable and built for professionals who need to carry out work at elevated heights but not with maximum safety and stability. The scaffold Metal 8 is made of galvanized steel with steps and horizontal tubes in 40x15x1.5 mm tubular steel. posts of 40x1.5 mm. with 48x3 mm couplings and 20x1.5 mm galvanized steel diagonals. It has a base dimension of 2.00X1.10 m and has a footprint that varies from 2.70 m to a maximum of 18.30 m. The base is made up of 4 rotating 200 mm wheels with parking brake, the . Unlike the Metal 5 model which may seem similar to the scaffolding m6 and structurally heavier in terms of weight the risers are from mt. 1.20 therefore smaller than the metal 5 model just to facilitate the assembly and not to make the weight of the structure itself an endicap. Even the horizontal ones are double rather than single like the Metal 5 this gives even more stability. It is identified in the scaffolding Metal 6 who in the articles seeks the robustness of the past and that today is no longer found.
The wheels have a capacity of 300Kg. Cad. Scope both static and movement
The Parapet and the base are previously galvanized and subsequently painted with polyester powders for a protection against rust that lasts over time
Elements compositions:
-
Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.
-
Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.
-
Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.
DIMENSIONS AND OVERALL DIMENSIONS |
Overall height of structure
|
11,10 mt
|
Max. Height of work
|
11,90 mt
|
Max. Height on the floor
|
9,95 mt
|
Basic width
|
1,14 mt
|
Base length
|
2,00 mt
|
Weight
|
90 Kg
|
|
STANDARD COMPOSITION (STRUCTURE ONLY) |
Pc 1 |
Galvanized and painted base dim. overall dimensions 200x114 cm Complete with 4 anti-crushing norm wheels of 200 mm. gir. with brake |
Pc 8
|
Galvanized 120 cm span (2 shoulders, 2 horizontal 4 diagonals) |
Pc 1 |
Galvanized and painted railing terminal (2 end shoulders, horizontal terminals, 4 diagonals) |
Pc 4 |
Stabilizing auction 250 cm |
|
COMPLETE COMPOSITION IN ADDITION TO THE COMP. STANDARD |
Pc 4
|
Complete work surface 185x96 cm (1 fixed top and 1 shelf with trapdoor) |
Pc 1 |
Full toeboard for worktop |
Pc 3
|
Internal aluminum ladder |
Pc 1
|
Adjustable aluminum internal staircase |
Pc 1 |
Pianetto di partenza appoggio scala |
Pc 1 |
Floor protection kit |
REFERENCE STANDARDS |
UNI EN 1004 STANDARD |
D.l.g.s 81 of 2008 Art 140 |
Important specifications of the UNI EN 1004 standard
The UNI EN 1004 standard allows a maximum scaffolding height of up to 12 Mt in indoor environments and up to 8 Mt. in outdoor environments with no wind. Once these measures have been passed, the Legislative Decree 81/2008 applies
Scaffolding heights cod M6111