Left Banner

  • maxi tris
TERRACE

RETRACTABLE TERRACE LADDER IN IRON WITH 4 ELEMENTS

(1)
SCARI
TERRACEPZ4
New

Retractable ladder for terrace with rigid structure with 4 moving parts composed of white painted steel steps (RaL 9010) and galvanized frame.

misure-foro-botola

SELECT THE HEIGHT AND MEASUREMENTS OF THE HATCH HOLE 

ALTEZZA D : DA 276 A 300 CM
FORO AxB : 60x90 cm
check In Stock
Hurry! only 9999 items left in stock.
€1,554.00
Tax included
Quantity

Retractable ladder for TERRACE with rigid structure with 4 moving parts consisting of 10 steps in 15/10 molded sheet metal and painted white (RAL 9010) and mobile structure made of tubular steel (50 x 20 mm) and shock and return springs for facilitate the opening and closing of the same staircase.

On the staircase there is a double lateral handrail welded on the right and left side of the upright (for widths of 70 cm) - or only on the right side (for widths of 50 cm and 60 cm) - and landing handles to facilitate the exit to the floor higher.

The frame is in 10/10 galvanized steel sheet while the trap door is made of a first choice chipboard panel (16 mm thick) with minimal formaldehyde emission (class E1 standard UNI EN 13986: 2005).

The rigid attic ladder is certified according to UNI EN 14975: 2007 and guarantees a load capacity of 150 kg as it has been tested with a static test load of 260 kg.

The retractable ladder for attic with 4 elements is shipped completely assembled and ready to be installed.

WARNING CAREFULLY CHECK THE OVERALL DIMENSIONS BEFORE PURCHASING. RETURNS WILL NOT BE ACCEPTED FOR WRONG ORDERED MEASURES

STANDARD EQUIPMENT:

  • Ladder structure in pressed steel sheet 15/10 protected by electrolytic galvanizing
  • Roof access structure made of 15 mm poplar plywood panels, fixed to 10/10 galvanized steel frame
  • Landing steps to facilitate the exit to the upper floor (for roof access structures higher than 60 cm)
  • Landing handles
  • Poplar plywood top cover (15 mm) covered with galvanized steel sheet and cremone opening handle
  • First choice poplar plywood panel (15 mm thick) with return shock absorbing springs to facilitate the opening and closing of the staircase (gas spring for dimensions greater than 70 × 100 cm) and reinforcement angles
  • Bolted levers for easy scale adjustment
  • Cushioning springs to facilitate the opening and closing of the staircase
  • Gas spring (for dimensions> 70 x 100 cm)
  • Tie for adjusting the maximum opening angle of the ladder
  • "L" brackets for anchoring to the floor to facilitate the installation of the staircase
  • Telescopic handrail on the right side
  • Steps with non-slip shape
  • Ground support feet
  • Maneuvering rod

: TERRACEPZ4
Hurry! only 9999 items left in stock.
New