Orthogonal joint for fixed scaffolding certified
Best sellers
Active filters
Eyelet with M12 steel plug
Eye for anchoring scaffolding
Wheel for scaffolding 200 mm. with plate
Polyamide wheel and polyurethane coating capacity 300kg.
PVC bases for scaffolding conf. 10 Pcs.
Under-bases with PVC reflector to be applied to the base of the fixed scaffolding tested for all loads
Pack of 10 pcs PVC joint
Accident prevention pvc joint cover to avoid accidental impacts near the scaffolding, accident prevention joint cover is equipped with reflector
HARNESS ELARA 130
Harness kit Elara130 for positioning the operator consisting of harness, 1.5 m lanyard and steel carabiner, for positioning in the workplace.
PROMO COMPLETE WITH TOP WITH HATCH AND 4 STABILIZING AUCTIONS
Scaffolding Mod. METAL5 Cod.M5750P / M5750PHD
Professional scaffolding METAL5 working height Mt. 8,30 base dimensions mt. 2.00 x 1.10
Choose the version from the menu: Composition
Standard: Code M5750 only structure to add the desired accessories from the appropriate section at the bottom Accessories
Complete: Code. M5750HD complete structure with all accessories as per UNI EN 1004 standard
FREE TRANSPORT THROUGHOUT ITALY
OFFER VALID UNTIL STOCKS LAST
Scaffold Mod. M5 Cod.M5105 / M5105HD
Professional scaffolding M5 H. work Mt. 11.30 basic dimensions mt. 2.00 x 1.10
Choose the version from the menu: Composition
Standard: Code. M5105 only structure to add the desired accessories from the appropriate section at the bottom Accessories
Complete: Code. M5105HD complete structure with all accessories as per UNI EN 1004 standard
Scaffold Mod. M5 Cod.M5900 / M5900HD
Professional scaffolding M5 working height Mt. 9.80 basic dimensions mt. 2.00 x 1.10
Choose the version from the menu: Composition
Standard: Code M5900 only structure to add the desired accessories from the appropriate section at the bottom Accessories
Complete: Code M5900HD complete structure with all the accessories as per UNI EN 1004 standard
Scaffolding metal 7 code METAL7885
Galvanized iron scaffolding model Metal 7 h. Work 8.85 Mt. Working height dim. basic Cm 200x92
For this scaffolding free shipping
Tubular anchor for scaffolding
L-shaped anchorage in tubular diam. 48 mm CF. 10 pcs.
Anchor in tubular rod for scaffolding, complete with rear protective cap, entirely hot-dip galvanized and certified according to current regulations.
- Tube diameter 48 mm
- Hot galvanized iron material
- Length selectable
- Pack of 10 pcs
Scaffolding Metal 7 h. Working 5.65 mt. ing size. Based 200x92 cm.
Select the composition from the "composition"
Scaffold metal 7 Complete as shown in the picture Standard version.
Galvanized iron scaffolding model Metal 7 h. Work 7.25 Mt. Working height dim. basic Cm 200x92
Choose composition See below for details
Free shipping for complete composition
Pack of 5 pcs of inclinators for base plate of 5 degrees each.
The sub-base inclinators can be superimposed on top of each other and increase the inclination from 5 to 10 to 15 acc.
Scaffold Mod. M5 Cod.M5750/M5750HD
Professional scaffolding M5 working height Mt. 8.30 basic dimensions mt. 2.00 x 1.10
Choose the version from the menu: Composition
Standard: Cod. M5750 only the structure to add the desired accessories from the appropriate section at the bottom Accessories
Complete: Cod. M5750HD complete structure with all accessories as per UNI EN 1004 standard
Scaffold Mod. M5 Cod.M5450 / M5450HD
Professional scaffold METAL5 working height Mt. 5.30 basic dimensions mt. 2.00 x 1.10
Choose the version from the menu: Composition
Standard: Cod. M5450 only the structure to add the desired accessories from the appropriate section at the bottom Accessories
Complete: Cod. M5450HD complete structure with all accessories as per UNI EN 1004 standard
M12 steel dowel for eyelet
Replacement anchor for scaffolding eye M12 (pack of 20 pcs.)