Full working height scaffolding at 8.20 meters complete with platform

WORK PLATFORM WITH HATCH

SUPPLIED!

The work platform with trapdoor fixed to the Full scaffolding is built with a galvanized iron frame and a fire-resistant wooden support base. In addition to preventing accidents, the work surface does not deteriorate in contact with water or atmospheric agents such as rain humidity, etc....The top is attached to the scaffolding by means of hooks which increase stability

QUICK COUPLING PIN

SUPPLIED

SCREW LEVELER

NOT SUPPLIED

4 screw levelers can be added to the full scaffolding, which can be adjusted horizontally and vertically. Thanks to this accessory, the scaffolding can be installed on uneven ground and floor and adjusted horizontally in addition to its greater stability. The maximum vertical overhang between the platform and the surface of the wheels is 12 cm.

HALF FIXED WORKTABLE

SUPPLIED

If you need to climb tools or heavy machines (air conditioners, etc.) onto the scaffolding, the half worktop without trapdoor and in non-slip wood could be very useful, to be positioned in the intermediate position of the scaffolding to facilitate the ascent of heavy tools or machines .

ADJUSTABLE STABILIZER ROD 200/300 CM

SUPPLIED

You will find the 200 cm telescopic stabilizing rods supplied with the possibility of extending them up to 300 cm which are mounted using quick hooks to the scaffolding columns, the rods shore up the scaffolding during the work and guarantee almost total stability. To move the scaffolding, just unlock the knob and lift the stabilizer rod.

LAME FOR STAIRS

NOT SUPPLIED

Se si devono svolgere lavori in altezza su scale, piani rialzati o piani inclinati indispensabili sono gli zoppi con uno sbalzo regolabile ogni 17 cm fino a 90 cm permettono di svolgere il lavoro in tutta sicurezza. Lo zoppo viene bloccato con pomello alla base e giunto rapido al piantone per dare il massimo della stabilità.