Aluminum scaffold ALUMITO MAXI H. 6.30 Mt. Working

ALUMITO aluminum professional scaffolding with reduced dimensions, particularly suitable for all those works that are carried out in industrial, commercial indoor environments and in any case where there is the need to operate at medium to high heights.

The supporting shoulders are built with a 25 x 65 mm rectangular section. The square steps 30 x 30 mm. The 4 wheels Ø 125 mm. With brakes are standard in the scaffolding package. The load-bearing steel base with overall dimensions of 1.60x0.86 meters contains the telescopic screw levelers. (standard) The lateral crossbeams are equipped with solid aluminum castings designed to contain the shoulder grafts which are made of steel and covered with very high impact resistance nylon compounds. high resistance hinges.

To obtain a solid locking between the crossbars and the shoulders, simply twist the anti-thread spring rod after having inserted the shoulders, with their plasticized couplings, into the female crossbars of the crossbars.

 The ALUMITO MAXI scaffolding is complete with an aluminum / wood worktop with trapdoor and toeboard complete as standard including the price as shown in the image.

New: the tops are now in EURODECK FSC certified wood (not as in the image)

Alumito Composition Cod: AMMX

Pc 1 complete base with wheels and levelers

Pcs 2 Complete spans

Pcs 1 Terminal span

Pcs 1 Aluminum / wood worktop with trap door

Pcs 1 Complete sill toeboard 

Heights and dimensions:

Working height 6.30 Mt.

Overall height 5.40 Mt.

Height to the floor 4.20 Mt

Illustrative montage phase of the aluminum scaffolding ALUMITO MAXI FACAL

1) POSITION THE BASIC ELEMENTS 1,

CHECKING STABILITY E LEVELING, INSERTING THE LONGITUDINAL TRAVERSE 2, ACCORDING TO THE SENSE OF THE ARROWS

2) FOLLOW THE MONTAGE BY INSERTING THE SIDE SHOULDERS 3,

ON THE BASIC CROSSBARS 2, MAKING SURE AFTER THE INSERTION THAT THE LOCKING MECHANISM 4, IS IN POSITION AS DETAILED.

3) INSERT THE DIAGONALS 5, IN THE DIRECTION OF THE ARROWS, BY AGENDING

ON THE SPRING OPENING LEVER (SEE DETAIL). THEN PLACE THE UPPER CROSSBARS 6, IN COMBINATION OF THE SHOULDERS 3.

4) CONTINUE THE MONTAGE BY INSERTING THE SHOULDERS 7, ON THE CROSS BARS 6, THEN THE DIAGONALS 8, FINALLY THE TERMINAL HANDLES 9 SECOND SENSE ARROWS.

5) POSITION THE SINGLE FLOOR WITH HATCH 10,

(OR THE 2 DOUBLE PLANS) SECOND

NEED, AND FINALLY CHECK THE STABILITY AND LEVELING BEFORE USE, BY ACTING ON THE FOUR LEVELERS 11, LOCKING THEM THEN WITH THE SAFETY SCREW 12.

6) ALUMIT COMPOSITION MAXI REPEAT OPERATIONS 2 AND 3 PEARL SECOND RAISED FROM 1800 (6 STEPS)

 

The Eurotrabatello Alumito maxi scaffolding is built in compliance with Legislative Decree 81/2008
Alumito maxi is built in compliance with EN 1004 (with large stabilizers requirement) ref.
Certificate no. 2006/2882 Alumito Standard also complies with ZH1-534.8 standards and TUV-GS certificate.