Italiano
English
Français
Scaffold prof. METAL 8 Mt 3.50 h. Working
Scaffolding Mod. METAL 8 Cod. M8270
Professional scaffolding working height Mt. 3.50 basic dimensions mt. 2.60 x 1.14 maximum productivity ...
SCROLL DOWN TO INFO COMPOSITIONS OR ADDITION OF ACCESSORIES
| Complete plan for scaffold prof. M8 | +€381.00 |
| Complete toeboard for scaffold M8 | +€263.00 |
| Fixed half floor for M8 scaffolding | +€189.00 |
The PROFESSIONAL METAL 8 scaffolding is suitable for professionals who need to carry out work in high altitudes and not with maximum safety and stability. The scaffolding metal 8 thanks to its large base dimension allows it to be very productive on large facades. It is built in galvanized iron with steps and horizontal tubes in 40x15x1.5 tubular 40x1.5 cm with 48x3 grafts and iron diagonals zinc plated from 20x1.5. It has a base size of 2.60 X1.10 m and has a footprint that varies from 2.70 m to a maximum of 18.30 m. The base consists of 4 high-capacity swivel wheels with a parking brake. The features that make a m8 scaffolding and high productivity thanks to its width. The risers are from mt. 1.20 therefore simpler and easier to assemble and the horizontal ones are double rather than single like most of the rolling scaffolds on the market. In conclusion, the scaffolding Metal 8 is aimed at those who look for the strength of the past in the articles and that today is no longer found on the market.
Elements compositions:
- Base m.2,60x1,14: The base is composed of 4 swivel castors with brake 200Ø motate on square structure + 2 horizontal connectio
- Riser / span: the risers are composed of 2 parapets + 2 horizontal currents and 4 bracing diagonals.
- Terminal: the parapet is composed of 2 lateral shoulders + 2 horizontal terminals and 4 bracing diagonals.
Features and dimensions
| Maximum work height | Structure height |
Maximum height to the floor |
Dimensions ing.base | Weight |
| 3,70 mt | 2,70 mt. | 1,55 mt. | 250x110 | 70 |
Standard scaffolding composition (only structure)
| Base | Riser/Spam h 1.20 mt |
Parapet term. h 1 mt |
| Pc. 1 | Pc 1 | Pc 1 |
OTHER ACCESSORIES CAN BE ADDED TO THE RIGHT OF THE SCREEN
IMPORTANT DETAILS METAL 8 SCAFFOLD
 |
Anti-crushing wheels
The Scaffold METAL8 is supplied with 4 high-capacity nylon Ø 200 mm wheels and neoprene protection and all with revolving axle with brake. The wheels with these features make it possible to avoid the crushing of normal rubber wheels when subjected to non-indifferent loads, in addition the neoprene coating protects valuable floors from scratches or stains that normal rubber wheels release. |
|
|
Completely removable baseThe base of the scaffolding Metal 8 is quickly assembled from 4 pieces in a single piece, this allows a transport and a simple storage of little bulk. The base has been built to give maximum stability to the scaffolding and has a double protection against wear as it is first galvanized and then epoxy powder coated. |
 |
Double horizontal bar
The METAL6 / 8 scaffolding towers are built bearing in mind the maximum stability and safety for this reason they have double horizontal bars connected in turn to each other. Sturdiness is one of the main points of the Metal6 and Metal8 Professional scaffolding to work comfortably and safely even in height |
 |
|
Reference Regulations
The Schaffold Metal 8 has as reference two regulations both in force in the Italian territory, the Legislative Decree 81/2008 and refers to the indications of scope of the European Standard UNI EN 1004. To view the composition according to the legislation just display the table below " compositions, while for the total cost of the scaffolding just select the top curtain "compositions" |
|
 |
WATER-REPELLENT NON-SLIP WORKTOP
Anti-slip working platform 250X96 cm. |
 |
Security lock
All the worktops of the professional scaffolding are equipped with a safety anti-wind hook, once the top has been positioned on the desired height it will be sufficient to move the hook down to make the worktop safe from accidental releases. |
 |
Collar Stabilizing Rods
The stabilizing rods are blocked by a double joint with quick coupling / release, this allows a total block of the element and consequently an extreme stability to the scaffolding. To move the scaffolding, simply release the joint slightly and lift the rod. |
 |
Quick coupling pin
Locking of the risers is via diagonals, which are hooked through the pin with cascade lever, this system allows the assembly / disassembly of the scaffolding in a very short time and in an extremely easy way. The cascade lever allows a secure attachment of the diagonals. |
 |
Lame for Jumps and Stairs
The lame can be adjusted every 20 cm and has a minimum overhang of 20 cm and a maximum of 120 cm. this allows the scaffolding to be positioned on ladders, overhangs, etc. The lame can be mounted on the scaffold both on the short side and on the long side. Predisposition for mounting the wheels. |
Data sheet
- ALTEZZA LAVORO
- da 3 a 4 mt
- MATERIALE
- Ferro zincato
- INGOMBRO BASAMENTO
- 250x110 cm
- Utilizzo
- Professionale
- Normative
- Europea EN 1004
Italiana D.Lgs 81/08 - Modello
- Metal 8
Specific References
- EAN13
- 698142823320
16 other products in the same category:
- -5%
- Out-of-Stock
You might also like
