Scaffold prof. METAL6 Mt 11.90 h. Working

The METAL 6 scaffolding is suitable and built for professionals who need to carry out work at elevated heights but not with maximum safety and stability. The scaffold Metal 8 is made of galvanized steel with steps and horizontal tubes in 40x15x1.5 mm tubular steel. posts of 40x1.5 mm. with 48x3 mm couplings and 20x1.5 mm galvanized steel diagonals. It has a base dimension of 2.00X1.10 m and has a footprint that varies from 2.70 m to a maximum of 18.30 m. The base is made up of 4 rotating 200 mm wheels with parking brake, the . Unlike the Metal 5 model which may seem similar to the scaffolding m6 and structurally heavier in terms of weight the risers are from mt. 1.20 therefore smaller than the metal 5 model just to facilitate the assembly and not to make the weight of the structure itself an endicap. Even the horizontal ones are double rather than single like the Metal 5 this gives even more stability. It is identified in the scaffolding Metal 6 who in the articles seeks the robustness of the past and that today is no longer found.

The wheels have a capacity of 300Kg. Cad. Scope both static and movement

The Parapet and the base are previously galvanized and subsequently painted with polyester powders for a protection against rust that lasts over time

Elements compositions:

• Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.

• Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.

• Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.