Scaffolding Model Full working height 8.20m including the operator the scaffolding will be supplied as per the composition below with a worktop with trapdoor 4 stabilizer rods and a 100 CM terminal parapet that protects the operator.
WORK PLATFORM WITH HATCH
SUPPLIED!
The work platform with trapdoor fixed to the Full scaffolding is built with a galvanized iron frame and a fire-resistant wooden support base. In addition to preventing accidents, the work surface does not deteriorate in contact with water or atmospheric agents such as rain humidity, etc....The top is attached to the scaffolding by means of hooks which increase stability
SUPPLIED
The risers of the Full scaffolding are blocked by means of diagonals, the locking / unlocking of these takes place quickly using the pin with cascade lever, this system allows the assembly / disassembly of the scaffolding in a short time and in an extremely easy way. The cascade lever allows a secure hooking of the diagonals.
NOT SUPPLIED
4 screw levelers can be added to the full scaffolding, which can be adjusted horizontally and vertically. Thanks to this accessory, the scaffolding can be installed on uneven ground and floor and adjusted horizontally in addition to its greater stability. The maximum vertical overhang between the platform and the surface of the wheels is 12 cm.
SUPPLIED
If you need to climb tools or heavy machines (air conditioners, etc.) onto the scaffolding, the half worktop without trapdoor and in non-slip wood could be very useful, to be positioned in the intermediate position of the scaffolding to facilitate the ascent of heavy tools or machines .
SUPPLIED
You will find the 200 cm telescopic stabilizing rods supplied with the possibility of extending them up to 300 cm which are mounted using quick hooks to the scaffolding columns, the rods shore up the scaffolding during the work and guarantee almost total stability. To move the scaffolding, just unlock the knob and lift the stabilizer rod.
LAME FOR STAIRS
NOT SUPPLIED
Se si devono svolgere lavori in altezza su scale, piani rialzati o piani inclinati indispensabili sono gli zoppi con uno sbalzo regolabile ogni 17 cm fino a 90 cm permettono di svolgere il lavoro in tutta sicurezza. Lo zoppo viene bloccato con pomello alla base e giunto rapido al piantone per dare il massimo della stabilità.
| Dimensioni | |
|---|---|
| Altezza d'ingombro | 7,25 mt |
| Altezza max di lavoro | 8,20 mt |
| Altezza al piano | 6,25 mt |
| Larghezza di base | 1,60 mt |
| Lunghezza di base | 0,84 mt |
| Peso | 135 Kg |
| Composizione | |
|---|---|
| Base | pz 1 |
| Alzata da 150 cm (2 scalette, 4 diagonali, 2 correnti) | pz 4 |
| Terminale Parapetto | pz 1 |
| Mezzo piano | pz 1 |
| Aste stabilizzatrici telescopiche da 200 a 300 cm | pz 4 |
| Piano di lavoro con botola |
Pz 1 |
| Ruote girevoli con freno | N° 2 Ø 125 |
| Ruote fisse | N° 2 Ø 125 |
| Normative | |
|---|---|
| Conformità D.lgs.81/08 | |
| Conformità D.lgs. 626/94 | |
| Portata piano 150 Kg | |
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
Italiano
English
Français
