Scaffold prof. METAL6 Mt 9.50 h. Working

The PROFESSIONAL METAL 6 scaffolding built and built for professionals in the construction sector who need to carry out work on façades or similar at consistent and uneven heights, but with maximum safety and stability. The scaffolding is made of galvanized steel with steps and horizontal tubes of 40x15x1.5 mm tubular. 40x1.5 columns with 48x3 mm clutches. and diagonals in 20x1.5 mm galvanized steel. It has a base size of 2.00X1.10 m. and has a footprint that varies from 2.70 m to a maximum of 18.30 m. (anchored to wall or fixed structure).
The base is composed of 4 revolving wheels of 200 mm. with parking brake, Unlike the Metal 5 model which may seem similar to the scaffolding m6 and structurally heavier in terms of weight but at the same time the risers are from mt. 1.20 therefore simpler and easier to assemble, the horizontal ones are double rather than single as on the scaffolding mod. Metal 5. Basically the metal scaffolding model 6 is aimed at those who are looking for the strength of the past in products and that today is no longer found or is difficult to find anti-crushing wheel for scaffolding

The Parapet and the base are previously galvanized and subsequently painted with polyester powders for protection against rust even over decades

Elements compositions:

• Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.

• Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.

• Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.

Scaffold heights Model M6 cod.M6870