Italiano
English
Français
Scaffold prof. METAL 6 Mt 14.30 h. Working
Scaffolding METAL 6 Cod. M6135
Professional scaffolding m6 working height Mt. 14.30 dimensions ing. base mt. 2.00 x 1.14
SCROLL DOWN LESS FOR MORE TECHNICAL DETAILS AND COMPOSITIONS
The Metal 6 scaffold designed and built for professionals and to carry out painting or renovation works at elevated heights with maximum safety and stability. The scaffolding is made of galvanized iron with steps and horizontal tubes in rectangular 40x15x1.5 mm tubular steel. The posts of the side shoulders are 40x1.5 mm. with horizontal round tubes of 48x3 mm round tubes. The diagonals that form the bracing between the risers are hot-galvanized 20x1.5. The basic dimensions of the scaffold model M6 are 2.00X1.10 m and it has a footprint that varies from 2.70 m to a maximum of 18.30 m. Anchored) The base is made up of 4 pioretto wheels with parking brake and has the possibility of inserting the levelers / stabilizers (included in the price) that level and stabilize the scaffolding where the ground is uneven. The scaffolding m6 has a more robust and heavier structure compared to other scaffolding but this does not involve greater efforts in assembly because the risers being from mt. 1.20 are shorter than standard scaffolds therefore simpler and easier to assemble, the horizontal ones are double rather than single like most professional scaffolding and this doubles the stability. The scaffolding model Metal 6 is aimed at all those people who are looking for the strength and reliability of a product that is difficult to find today.
The Parapet and the base are previously galvanized and subsequently painted with polyester powders for a protection against rust that lasts over time
The work plans are not included in the price but can be added together with all the other accessories in the "Accessories" section located to the right of the screen
Elements compositions:
-
Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.
-
Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.
-
Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.
| DIMENSIONS AND OVERALL DIMENSIONS | |
|---|---|
|
Overall height of structure |
12,35 mt |
|
Max. Height of work |
14,30 mt |
|
Max. Height on the floor |
12,35 mt |
|
Basic width |
1,14 mt |
|
Base length |
2,00 mt |
|
Weight |
320 Kg |
| STANDARD COMPOSITION (STRUCTURE ONLY) | |
| Pc 1 | Galvanized and painted base dim. overall dimensions 200x114 cm Complete with 4 anti-crushing norm wheels of 200 mm. gir. with brake |
| Pc 10 |
Galvanized and painted base dim. overall dimensions 200x114 cm Complete with 4 anti-crushing norm wheels of 200 mm. gir. with brake. |
| Pc 1 | Terminal Galvanized and painted railing of 100 cm (2 end shoulders, horizontal terminals, 4 diagonals) |
| Pc 4 | Stabilizing auction of 250 cm |
| REFERENCE STANDARDS |
| UNI EN 1004 STANDARD (not applicable to scaffolding that exceeds 12 m above the floor) |
| D.l.g.s 81 of 2008 Art 140 (anchoring each cavity.) |
Important specifications of the UNI EN 1004 standard
The UNI EN 1004 standard allows a maximum scaffolding height of up to 12 Mt in indoor environments and up to 8 Mt. in outdoor environments with no wind. Once these measures have been passed, the Legislative Decree 81/2008 applies
Data sheet
- ALTEZZA LAVORO
- da 14 a 15 mt
- MATERIALE
- Ferro zincato
- INGOMBRO BASAMENTO
- 200x110 cm.
- Utilizzo
- Professionale
- Normative
- Europea EN 1004
Italiana D.Lgs 81/08 - Modello
- Metal 6
13 other products in the same category:
You might also like
