Italiano
English
Français
Scaffold prof. METAL 8 Mt 14.30 h. Working
Scaffolding Metal 8 Cod.M8135 / M8135HD
Professional galvanized scaffolding M8 working height Mt. 14,30 base dimensions mt. 2.60 x 1.14
only structure to add the desired accessories from the appropriate section below Accessories
| Complete plan for scaffold prof. M8 | +€381.00 |
| Complete toeboard for scaffold M8 | +€263.00 |
| Fixed half floor for M8 scaffolding | +€189.00 |
Metal scaffolding 8: The Scaffolding in this composition is sold in a structure to be anchored to the wall or fixed structure (decree 81 of 208 art. 140) it is not possible to implement the UNI en 1004 STANDARD because the standard refers to the scaffolding that does not exceed the 8 m on the floor outdoors and 12 m indoors. therefore anchoring accessories and intermediate work surfaces with a maximum center distance of 4.30 m must be applied. AND REFER TO THE SAME Legislative Decree 81/2008.
IT IS POSSIBLE TO ADD ALL THE COMPONENTS ON THE RIGHT OF THE SCREEN
METAL 8 SCAFFOLDING COMPONENT COMPOSITION
- Base m.2,60x1,14: The base is made up of 4 swivel wheels with 200Ø brake driven on a square structure + 2 horizontal connection.
- Riser/span from 120 cm: the risers consist of 2 shoulders + 2 horizontal beams and 4 diagonal braces.
- Terminal: the parapet is made up of 2 lateral shoulders + 2 horizontal terminals and 4 diagonal braces.
Characteristics and dimensions
| Maximum work height | Structure height |
Maximum height to the floor |
Dimensions ing.base |
Weight kg. |
| 14,30 mt | 13,50 mt. | 12,35 mt. | 260x114 | 340 |
Standard scaffolding composition (only structure)
| Base | Riser/Span h 1.20 mt |
Parapet term. h 1 mt |
Stabilizing auction |
| Pc. 1 | Pc. 10 | Pc. 1 | Pz 4 |
IMPORTANT DETAILS SCAFFOLD METAL 8
 |
Anti-crushing wheels
The METAL8 scaffolding is supplied with 4 swivel castors with a Ø 200 mm high-capacity brake in nylon and neoprene protection. The wheels with these characteristics allow to avoid the crushing of the normal rubber wheels when subjected to not indifferent loads, in addition the neoprene coating protects precious floors from scratches or stains that the normal rubber wheels release. |
 |
Fully removable base
The base of the Metal 8 scaffolding can be quickly assembled from 4 pieces in a single piece, this allows a simple and space-saving transport and storage. The base was built to give maximum stability to the scaffold and has a double protection against wear as it is first galvanized and then painted with epoxy powders. |
 |
Horizontal double bar
The METAL6 / 8 scaffolding are built with maximum stability and safety in mind, for this reason they have double horizontal bars connected in turn to each other. Strength is one of the main points of the Professional Metal6 and Metal8 scaffolding to work comfortably and safely even at height |
 |
|
Reference Regulations
The Scaffolding Metal 8 has as reference two standards both in force in the Italian territory, the DLG 81/2008 and refers to the indications of the scope of the European Standard UNI EN 1004. To view the composition according to the legislation just view the table below " compositions, while for the total cost of the scaffolding just select the top curtain "compositions" |
|
 |
Work surface anti slip
The worktop is built with a galvanized iron frame and the top is in non-slip treated wood, the car play multilayer wood is treated to withstand bad weather (water, humidity etc.). The top is extremely light and facilitates assembly and disassembly of the scaffolding |
 |
Security lock
All the Worktops of professional scaffolding are equipped with an anti-wind safety hook.Once the worktop is positioned at the desired height, simply lower the hook with a rapid movement to secure the worktop from any accidental release. |
 |
Stabilizing Rods Collar
The stabilizing rods are locked by means of a double joint with fast coupling / release, this allows total blocking of the element and consequently extreme stability to the scaffold. To move the scaffolding, just release the joint slightly and lift the rod. |
 |
Quick coupling pin
The lifting of the risers takes place through diagonals, which are hooked by means of the pin with cascade lever, this system allows the scaffolding to be assembled / disassembled in a very short time and in an extremely easy way. The cascade lever allows a secure coupling of the diagonals. |
 |
Lame for overhangs and stairs
The lame can be adjusted every 20 cm and has a minimum overhang of 20 cm and a maximum of 120 cm. this allows the scaffolding to be positioned on stairs, overhangs, etc. The lame can be mounted on the scaffolding on both the short and long sides.Predisposition for mounting the wheels. |
Data sheet
- ALTEZZA LAVORO
- da 14 a 15 mt
- MATERIALE
- Ferro zincato
- INGOMBRO BASAMENTO
- 250x110 cm
- Modello
- Metal 8
Specific References
- EAN13
- 698142111632
13 other products in the same category:
You might also like
